50% pvc 30% pl acrylic water base 15% pc 5% pu
VELLUTEX tear-off fabric with a velvety effect.
Ideal for creating lettering, it cancels the manual cropping time of the product and avoids the use of the laser. Tear-off fabric with velvety finishes, in a vast range of colors that will allow you to give the embroideries a gritty effect. Used with our rubber, they will give your embroideries a beautiful three-dimensional effect
RECOMMENDATIONS FOR USE
It is an easy to use material. Hoop the garment with our medium grammage interlining. Remove the protective card on the back of the product. Place a piece cut to size of the material to be used on the fabric on which it is to be embroidered, if necessary, holding it in place with a piece of double-sided adhesive.
Proceed with the embroidery, taking care to make a cord of the desired thickness and also a round of internal stitching (straight stitch, zig zag not heavily beaten) at 1-2 mm from the cord. Use our Madeira No. 40 with a matching color to make the stitching invisible, or with a contrasting color to create a pattern, a play of colour.
Possibly place our Eraser between the fabric and the tear-off fabric sheet which will give the embroidery a 3D effect.
Gently clean the excess material off the embroidery. Hold the embroidery with one hand and pull upwards with the other. The cleaning will be perfect and the embroidery well done.